The following are five easy and simple steps for you to maintain your HVAC system in the best working condition throughout the year.
1. Corrosion Prevention
The metal your HVAC oil tank is made of can get oxidized over a period of time due to air that helps accumulation of sludge and damage to the tank. A great preventative measure is to do a thorough cleaning every seven to ten years. In case you have an underground tank, it is best to switch it with a sheltered tank over the ground. This will reduce the possibility of damage caused by corrosion.
2. Tank Protection
There are so many elements that lead to rusting of different parts, which in turn causes weakening of the structure. Tanks can handle only a certain amount of weight. Therefore, it is important for you to stay alert because if the tank gives way, the structure might just crack. Rusting tends to start from inside and so covering of the tank is just not enough. If the structure has remained uncovered for too long then it has to be replaced.
3. Inspection of Leaks
Every single section of the heating system needs to be checked for oil leaks. You must take a closer look at the valves, delivery line, fittings and pipes. You should also look for leakages in the areas around grilles and air registers, floor joists, duct connections, and the heating unit. Clean all the leaking areas properly and seal them with foil tape or duct mastic for safety.
4. Burner Cleaning:
For keeping the indoor heating dependable and trouble-free, you should check the state of your burner on a regular basis. In case the burner is covered with undesirable substances such as carbon residue, it will be impossible for the flame to brighten up to its optimal brilliance. Because of this, it may sputter partially in and out of existence leading to uneven heating. It is therefore necessary for you to clean the burner on a regular basis, and also to ensure that the heat exchanger does not crack. Clean burner will assist in increasing heating efficiency and reducing fuel costs.
5. Installation of Cheap Upgrades:
There are numerous other inexpensive ways to save repairs in the future. For instance, installation of a safety valve can be of a lot of help. You may also put in a fuel delivery line covered with a sleeve that prevents leaks. These installations can be performed by a HVAC professional to ensure that there are no errors.
By taking out time to care for your heating system, you will be able to save a lot of bother on future repairs that may require hundreds of dollars and several hours of time, especially when you are hard-pressed. Consult a professional heating and air conditioning contractor for the right advice and informed options for your system.
